Dragon's Lair Fans - Arcade Lifestyle
General Chat => Artwork => Topic started by: DarthNuno on April 04, 2012, 07:53:59 PM
-
Requested by Ully! Sounds like a new vector logo request? ::) ;) :arrow:
-
Requested by Ully! Sounds like a new vector logo request? ::) ;)
definitely :P!
thx so much for the pic, bruno, but unfortunately i'd also need the text at the bottom of the plaque (and if possible a shot of the entire thing to get the spacing right). may i kindly ask you to get out your camera again? :-*
-
No problemo! Will do it tomorrow ;)
-
Here's an other shoot.
Hey, I didn't noticed so far the 'C' of ireCsa :arrow: :pac: :pac: :pac:
-
wonderful bruno, thx so much, i know you're extremely busy, but you found the time nevertheless!!! :spaceace:
ETIENNE? ;) ;D
-
Yes sir ? :D
-
Wooowww Etienne - faster than the speed of light !!! :spaceace:
-
And done ;)
I adjusted the "gold" in the file i received, but i guess that its best printed on a brass plate and keep that part transparant...
-
How do you do this Etienne? With Illustrator??
This kind of stuff is amazing, is this printed on metal also?
-
Looks very nice if you ask me. :spaceace:
-
How do you do this Etienne? With Illustrator??
This kind of stuff is amazing, is this printed on metal also?
Yep , Illustrator it is.
This is not printed yet, i only adjusted the file that i have received from the midway coindoor
there was no Irecsa label on there, so i added / adjusted the missing parts 8)
-
cmon etienne - HOW DID YOU DO THAT??!!
i have illustrator but have no idea where to start :(
-
I think you interpreted my explanation wrong, i mean by
i only adjusted the file that i have received from the midway coindoor
that i have adjusted the Vector file i received from Rich..
this is not an adjustment from a raster file, the raster file is just there as a refference.... ;)
The basics you can learn with some video's i have on my FTP
Download that, and you will understand the basics..
PM send ;)
by the way, start always by searching here :
http://vectorlib.free.fr/
there may be the vector file you need already.
Another tip; download a piece of artwork at the vectorlib, open that in illustrator and experiment with the shapes and layers that are already there.
that way you will get a hang of how it works ;)