Dragon's Lair Fans - Arcade Lifestyle
General Chat => 'Business' Area : Buy/Sell/Trade => Topic started by: Belike on August 28, 2011, 08:12:58 PM
-
I guess most of us has some arcade related stuff for sale/trade that is to heavy or it doesn't worth posting, I thought we would exchange them at Eurocade.I know our event is mainly about gaming and if you think it's a bad idea, just clear this topic.
Let me start with my stuff, 50% of all sales goes to Eurocade Piggy Bank. ;)
Complete working jamma setup with psu, coin mech, joysticks, buttons, speaker.MAybe there is also a stepdown converter, because I see 115 V signs on the psu, but it works with 220V. 15 eur(SOLD to Polderarcade)
(https://lh3.googleusercontent.com/-Ip5jPZ_3MUg/TlpmlkIWUII/AAAAAAAAEX8/HnHCaGVbhic/s912/k%2525C3%2525A9p%252520008.jpg)
(https://lh3.googleusercontent.com/-6u6fu7QxVoY/Tlpmm_StTKI/AAAAAAAAEYA/V5Uzk9Jpj3k/s912/k%2525C3%2525A9p%252520009.jpg)
(https://lh4.googleusercontent.com/-KrfuH8DpAu4/TlpmnMuV8ZI/AAAAAAAAEYI/ZtZVUld_XuI/s912/k%2525C3%2525A9p%252520011.jpg)
Working tetris pcb, I don't know if it is original or bootleg 10 eur
(https://lh4.googleusercontent.com/-mRg7F_Z-3LA/TlpmveMIWjI/AAAAAAAAEZM/Ga8VW0uD-A4/s912/k%2525C3%2525A9p%252520027.jpg)
To be continued......
-
Oh Béla, you read my mind, believe it or not, in the same idea: I was just about to ask the Eurocade crew if we could have a chalkboard or a place to stick post-it notes where people could write their "I'm looking for" or "I'm selling" stuff.
I'm looking for quite a few parts myself ::)
-
Turbo Outrun coin door with mech. and box 3 eur (crap pic)(SOLD to Pascal)
(https://lh5.googleusercontent.com/-vEC4-r4yRII/TlpmjDfCWQI/AAAAAAAAEXo/n-2-Yf7FlpY/s912/k%2525C3%2525A9p%252520042.jpg)
(https://lh6.googleusercontent.com/-ovsQ021cGvc/Tlpm2C-fSrI/AAAAAAAAEaI/RkcVaxvrp5w/s912/k%2525C3%2525A9p%252520041.jpg)
Turbo Outrun complete wiring harness with power brick, etc. 4eur (SOLD to Pascal)
(https://lh4.googleusercontent.com/-mGSLt-UuB_c/Tlpm0hz_zhI/AAAAAAAAEZ4/jpfP03o1I0g/s912/k%2525C3%2525A9p%252520037.jpg)
Double Dragon cp, joysticks need new rubber rings 4 eur (SOLD to Pieter)
(https://lh4.googleusercontent.com/-GlK4Wemjglg/Tlpm0zyGoUI/AAAAAAAAEaA/yxGpc6t8cZs/s912/k%2525C3%2525A9p%252520039.jpg)
(https://lh4.googleusercontent.com/-tOINTIBw6iQ/Tlpm1-vu7bI/AAAAAAAAEaE/e_K8YkpZyl0/s912/k%2525C3%2525A9p%252520040.jpg)
To be continued......
-
4X Lower coin door with box, similar with Williams Joust 3 eur/set
(https://lh5.googleusercontent.com/-OEHCYkJJU4Y/Tlpmzv-ITfI/AAAAAAAAEZw/iGZGiFTr5UY/s912/k%2525C3%2525A9p%252520036.jpg)
(https://lh6.googleusercontent.com/-8OJKwPAD1Gk/TlpmonOFqjI/AAAAAAAAEYQ/O6t0D-b6NjM/s912/k%2525C3%2525A9p%252520013.jpg)
2X power switch with cable and metal housing 1 eur/set(SOLD to KID)
(https://lh3.googleusercontent.com/-z33XirV_6K8/TlpmzNAUkdI/AAAAAAAAEZo/c7Qu3ehgoRg/s912/k%2525C3%2525A9p%252520034.jpg)
(https://lh4.googleusercontent.com/-vnV8zr7n1Fc/TlpmzNOlutI/AAAAAAAAEZs/KK5OA9Qko1k/s912/k%2525C3%2525A9p%252520035.jpg)
2X Fruit machine bended bezel with backlights (for gameroom decoration) 3 eur/set
(https://lh5.googleusercontent.com/-BR9g68yfwT0/TlpmxAWi-eI/AAAAAAAAEZU/EGtbUI_OolU/s912/k%2525C3%2525A9p%252520031.jpg)
(https://lh5.googleusercontent.com/-8lugG-zTQ9M/TlpmxQiRUhI/AAAAAAAAEZY/VkratFa-oZ8/s912/k%2525C3%2525A9p%252520032.jpg)
(https://lh5.googleusercontent.com/-yd8z8PMTews/TlpmyeERoNI/AAAAAAAAEZk/GkfDtd2hu10/s912/k%2525C3%2525A9p%252520033.jpg)
To be continued...
-
2X Retro gambling machine coin slot 1eur/piece
(https://lh4.googleusercontent.com/-s6NISUMcEGg/TlpmsGhtp7I/AAAAAAAAEYs/xpNHqNcBO8Y/s912/k%2525C3%2525A9p%252520020.jpg)
2X switching psu working 5eur/piece(SOLD to André)
(https://lh3.googleusercontent.com/-zFVhIaSizgc/TlpmrXArrbI/AAAAAAAAEYo/ncz1uV_J-vk/s912/k%2525C3%2525A9p%252520019.jpg)
2X Banknote acceptor (set to euros) with metal cover 5/piece
(https://lh4.googleusercontent.com/-1o3PFctlYqo/Tlpmq4qWTeI/AAAAAAAAEYk/hVu8ZCeZA3A/s912/k%2525C3%2525A9p%252520018.jpg)
6X Coin counter free
(https://lh3.googleusercontent.com/-LkQ0e7LvCSE/TlpmqbZPMuI/AAAAAAAAEYg/8JdyWVsB8cs/s912/k%2525C3%2525A9p%252520017.jpg)
Set of 8 lit pushbuttons with bulbs and cherry microswitches 3 eur (SOLD to KID)
(https://lh3.googleusercontent.com/-Uf9RkylDn-k/TlpmqK5EYoI/AAAAAAAAEYc/1oSxEaxxpEI/s912/k%2525C3%2525A9p%252520016.jpg)
To be continued...
-
4X
Neon, fluorescent tube holders for arcade machines working ;D 3 eur/piece
(https://lh5.googleusercontent.com/-P_KQX3pvwCY/TlpmpJ-yLZI/AAAAAAAAEYU/Ax9xxjSklz0/s912/k%2525C3%2525A9p%252520014.jpg)
Incomplete coin doors 1eur/3piece
(https://lh4.googleusercontent.com/-4my5CJi2xmc/TlpmoP41xMI/AAAAAAAAEYM/nc4tWkV9mM8/s912/k%2525C3%2525A9p%252520012.jpg)
Chase Hq cp complete with all wires and connectors 8eur (SOLD)
(https://lh4.googleusercontent.com/-v7xEvfBgJ6E/TBD_3FbTIGI/AAAAAAAAEGs/FKSHvmdKoCk/s800/K%2525C3%2525A9p%252520195.jpg)
-
SWITCHERS SOLD !!! I'LL TAKE THEM !!!!
-
SWITCHERS SOLD !!! I'LL TAKE THEM !!!!
You mean power supplies or power switches with cable?
-
4X Neon, fluorescent tube holders for arcade machines working ;D 3 eur/piece
Right, the NEON police (TM) is confiscating one of those because of that brutal joke !
-
SWITCHERS SOLD !!! I'LL TAKE THEM !!!!
You mean power supplies or power switches with cable?
Sorry US slang...... Switcher = Switching Power Supply
-
Ok my Friend and 1 tube holder as a donation to the Neon Police. ;)
-
The Neon Police is willing to see this offense "through the fingers" this time for this donation that will go to the fund for widows of Neon police officers ! ;D ;D ;D ;D
( I guess some "newbies" are wondering what the hell we are talking about ! ;D ;D)
-
4 euro for a double dragon cp? Sold! ;D ;D ;D
-
4 euro for a double dragon cp? Sold! ;D ;D ;D
damn it - too late!!!
-
Great idea....can we all post our stuff in this thread ?
I've got some stuff as well. First of all a Mario Bros bezel in OK condition.
-
Chase Hq cp complete with all wires and connectors 8eur
SOLD, to the vector king ;)
-
Great idea....can we all post our stuff in this thread ?
Absolutely, that's why I made it for. :D
-
Make sure you'll have space left for the Space Pirate ! :)
-
Don't sell all this crap here ...
Bring it to the Eurocade , so that we all can have a look at ..
Didi
-
I think people dont want to load "unneccesary" things ...
just my two cents..
-
Far sale this 99% perfect glass bezel 'The Invaders' / 40€ at Eurocade only 8) :arrow:
-
For sale this 99% brand new Space Invaders *Deluxe* metal control panel for 30€
...and this Pac-Mania 'damaged' and to be cleaned for ... 5€ :pac: :ghost: :ghost: :ghost: :arrow:
-
For sale this Electrohome G07CB0 chassis.
It has been removed from my Berzerk. I'm almost sure it's working fine, because when I tried it via an advance mame dos setup, I had a good picture but the image was rolling up and down, and I wasn't able to stabilize it for good with the sync potentiometer. It happens very ofter when using an advance mame setup to real arcade monitor without using a video amplification signal device or using the bad horizontal / vertical wires combination...but will probably work 'out of the box' when using the real Berzerk PCB... you can take your chance... for 10€ ... or if it's not working, let's say it will be your contribution to DLF/ALS board ;D :P :arrow:
-
For sale this berzerk with few scratches on it, but would still looks cool on a wall for example... 5€
(picture on a window in order to highlight the default...) :arrow:
-
Far sale this 99% perfect glass bezel 'The Invaders' / 40€ at Eurocade only 8) :arrow:
Need to think about this one for 2 days.. mine is Little damaged but the hole cabinet is only in a Oke state so.. need to think!
-
Galaxian marquee
An adhesive sticker has to be removed on the front, except that, not to bad condition...10€ :arrow:
-
This *brand new* and high quality set of two SPY HUNTER side art ... 60€ :arrow:
-
Hmmm, after seeing all this cool stuff for sale I should have booked Eurocade after all. :-)
But no, it wasn't possible at the moment.
Shame, it would have meant shopping time.
-
I want the Electrohome G07CB0 chassis and galaxian marquee please
-
Ghosts'n'Goblins NOS side art, just perfect! :-* 60€ for the set :arrow:
ps: you can click on picture for high resolution version 8) Let me know if you don't see the pictures in attachment...
-
I want the Electrohome G07CB0 chassis and galaxian marquee please
OK, reserved for Robinholland 8)
-
Yes pls Bruno, I'll take the G&G sideart!
-
i would love to have the pac mania marque!
-
Thanks :wink:
The Electrohome G07CB0 chassis yours is better than my Spy Hunter chassis 8)
-
We're going to need a "market room" ;)
-
i would love to have the pac mania marque!
Congrats, you were faster. ;)
-
Galaxian bezel.
An adhesive sticker has to be removed on the front, except that, not to bad condition...10€ :arrow:
I'll take it, please. :)
-
I'll take the Berzerk marquee Bruno...if not spoken for yet...
-
We're going to need a "market room" ;)
Yep .. I think that the "Trading-Zone" will be bigger than the "Gambling-Zone" .. ;D
-
I found this Taito stuff also, it is some kind of a TDK noise filter ???I have 2 of these, one is in metal housing.
Edit:Taito Power Supplies for Space Invaders, etc.
(https://lh5.googleusercontent.com/-l86Bcc_LGHk/TlwHuaY_V9I/AAAAAAAAEao/Uw_J6c7-rPg/s800/k%2525C3%2525A9p%252520029.jpg)
(https://lh5.googleusercontent.com/-JNgUZANaUNc/TlwHtdLzPkI/AAAAAAAAEag/frmdgp124zM/s800/k%2525C3%2525A9p%252520033.jpg)
(https://lh5.googleusercontent.com/-cvLaLFqYERc/TlwHt4dhqSI/AAAAAAAAEak/lCMQgLheZzg/s800/k%2525C3%2525A9p%252520030.jpg)
-
.
-
We're going to need a "market room" ;)
Yep .. I think that the "Trading-Zone" will be bigger than the "Gaming-Zone" .. ;D
Fixed that..... ;D
-
Chase Hq cp complete with all wires and connectors 8eur (SOLD)
Any change you got the foot pedal assy too ?
-
Chase Hq cp complete with all wires and connectors 8eur (SOLD)
Any change you got the foot pedal assy too ?
Unfortunately not. :-\
-
Bela, i take the turbo outrun coin door & assy ;)
-
i would love to have the pac mania marque!
Congrats, you were faster. ;)
Take it, i'm more then happy with the DD cp.
-
OK, we have so far ...
* The Invaders bezel : Vnera ( to confirm) - 40€
* Electrohome G07CB0 chassis : Robinholland - 10€
* Galaxian marquee : Robinholland - 10€
* G'n'G set 2 of side art : Zapposh - 60€
* Berzerk marquee : Level 42 - 5€
* Pac-Mania 3D marquee : Belike - 5€
* Space Invader Deluxe CP : available - 30€
* Spy Hunter set of 2 side art : available - 60€
-
This QIX marquee in very nice condition - 15€ :arrow:
-
This QIX marquee in very nice condition - 15€ :arrow:
is that for the euro or the american cabinet version? could you do me a favor and measure it please, bruno?
-
This QIX marquee in very nice condition - 15€ :arrow:
is that for the euro or the american cabinet version? could you do me a favor and measure it please, bruno?
It's 57,9 cm x 20 cm
-
This lovely Q*Bert CPO for 35€ :arrow:
-
Original ARABIAN marquee - 8€ :arrow:
-
Ghosts'n'Goblins CPO *perfect* : 40€ :arrow:
-
i pass on the invaders glas. I will recontact you if i'm gowning for a perfect resto. But i would love to have the arabian marquee. Really like that game.
-
Original ARABIAN marquee - 8€ :arrow:
aaaaaaaaaaiii would like to buy that!!!! please!
-
MAN that must be rare and worth quite a bit more ? You just beat me Michael ! ;) No problem....
-
i pass on the invaders glas. I will recontact you if i'm gowning for a perfect resto. But i would love to have the arabian marquee. Really like that game.
OK, the invaders glass is already available, no prob.
You're the first for the Arabian, congratulation ;)
-
This original Burger Time glass bezel, great artwork & glass condition but unfortunately the colors are faded by the sun.
But it could be a nice decoration, or replacement for broken glass Midway cab, or any custom projects... 10€ :arrow:
-
This original Burger Time glass bezel, great artwork & glass condition but unfortunately the colors are faded by the sun.
But it could be a nice decoration, or replacement for broken glass Midway cab, or any custom projects... 10€ :arrow:
Aaaaaaail take that too :D :D :D
-
That HUUUUGE marquee box :
My initial idea is to remove the original 'Silent Scope' artwork, and use a custom artwork to display in my Game Room. It has a neon inside (not checked it TBH), but I really don't know when I'll have time to do that... so it's a great base for a kicking display project ...from your imagination. Very heavy - 40€ :arrow:
-
Geez, Bruno's going to need a trailer ;D ;D ;D
-
Cool, that display box could be exactly what I need for a custom Daytona single racer marquee. Definitely interested in that! If it fits, I take it. Could you provide the measurements? Hmmm ... I think I have to build speakers in that to make it perfect ;D
-
PunkRockCaveman if you buy the display box ant don’t need the marquee
Let me now im interested in it, will fit nice on my silent scope if I find a board set of silent scope 2
-
Geez, Bruno's going to need a trailer ;D ;D ;D
Tomorrow I need to to go to Lyon .. or somewhere between Lyon and Grenoble ... I cross Luxemburg .. if there is anything a can take with me from there to here let me know .. tomorrow morning I will start ! ..
Didi
-
This QIX marquee in very nice condition - 15€ :arrow:
I will take this one, please. :)
-
This QIX marquee in very nice condition - 15€ :arrow:
hmm, this is different from the versions i know! where did you get this from, bruno?
-
just gone through my stuff, there are also some items looking for a new home. will post pics and prices tomorrow - watch this space ...
p.s.: i love that thread! :-*
-
Love it too! Next time we need to open one earlier,
-
PunkRockCaveman if you buy the display box ant don’t need the marquee
Let me now im interested in it, will fit nice on my silent scope if I find a board set of silent scope 2
I don't need the marquee indeed, will fix it with plexi anyway. You can have it ... We can fix this on Eurocade ;) I hope it will fit the Daytona ...
-
You got a full seize 2 player daytona?
-
Cool, that display box could be exactly what I need for a custom Daytona single racer marquee. Definitely interested in that! If it fits, I take it. Could you provide the measurements? Hmmm ... I think I have to build speakers in that to make it perfect ;D
Sizes are :
Length : 70,2 cm
Height : 34,5 cm
Deep : 26 cm
-
OK, we have so far ...
Sold! :arrow:
* Electrohome G07CB0 chassis : Robinholland - 10€
* Galaxian marquee : Robinholland - 10€
* G'n'G set 2 of side art : Zapposh - 60€
* Berzerk marquee : Level 42 - 5€
* Pac-Mania 3D marquee : Belike - 5€
* ARABIAN marquee - Vnera - 8€
* Burger Time glass bezel - Muerto - 10€
* QIX marquee - Ckong - 15€
Available :arrow:
* Space Invader Deluxe CP : available - 30€
* Spy Hunter set of 2 side art : available - 60€
* The Invaders bezel : available - 40€
* Q*Bert CPO : available - 35€
* Ghosts'n'Goblins CPO - available - 40€
* Silent Scope 2 marquee Box - available - 40€
-
This QIX marquee in very nice condition - 15€ :arrow:
hmm, this is different from the versions i know! where did you get this from, bruno?
I got it long time ago, from Ebay US.
-
Bingo! That should fit just fine. I will take it... @polderarcade: you can have the marquee of course ;) @gyruss: it was a Daytona Twin when I bought it but I split it in half and another guy got the second half. So now it is a single racer and the win topper won't fit anymore of course. The Silent Scope box will fit almost perfect. I will just have to design some artwork ...
-
alright, here's some stuff i have for sale, might add more later!
operation bear glass marquee - has a small piece missing at the top on the right and the typical wear from inserting / removing it. sold to vnera for 2 euros :D
(http://farm7.static.flickr.com/6204/6099599092_28e8989d46_b_d.jpg)
crazy kong plastic marquee - condition: good! this would make a nice topper on any crazy kong cabinet. going to etienne for 4 euros
(http://farm7.static.flickr.com/6206/6099599466_a1f3216ec9_b_d.jpg)
sega hang on plastic marquee - condition: good! sold to kroustibat for 6 euros
(http://farm7.static.flickr.com/6183/6099051639_c255e076fc_b_d.jpg)
another sega hang on plastic marquee - condition: good, but it has some stickers on the front (removal easy though). sold to polderarcade for 5 euros
(http://farm7.static.flickr.com/6200/6099051823_4d345ec68f_b_d.jpg)
sega hang on manual - nothing to add except for the very low special eurocade offer: 2 euros
(http://farm7.static.flickr.com/6077/6099599272_35e9086e9d_b_d.jpg)
pole position manual set (3rd printing) which includes the following : operation manual, schematics and monitor manual. special eurocade offer: 8 euros
(http://farm7.static.flickr.com/6197/6099599972_e3e173d9b0_b_d.jpg)
pole position manual set (5th printing) which includes the following : operation manual, schematics and monitor manual. special eurocade offer: 8 euros
(http://farm7.static.flickr.com/6191/6099599704_b9d98f4c46_b_d.jpg)
jamma pcb p.o.w - prisoners of war (http://www.arcade-museum.com/game_detail.php?game_id=8951) - totally untested, but looks clean and complete! sold to ElPancho for 8 euros
(http://farm7.static.flickr.com/6181/6099615290_0af5c091cb_b_d.jpg)
jamma pcb asterix (http://www.arcade-museum.com/game_detail.php?game_id=6936) - full working order! sold to ElPancho for 20 euros
(http://farm7.static.flickr.com/6188/6099615018_f3b704707c_b_d.jpg)
if you're not happy with those prices, make me an offer, but be quick or someone else might have been quicker ... :P
-
Nice one Ully :-)
Asterix & Pow please.
-
first for the good "hang on" marquee ;)
-
i will take the hang on marqee with stickers
-
Haha, E-bay and Marktplaats would be jealous of the high rate of successful sales AND the incredible speed at which thing get sold....:)
-
Haha, E-bay and Marktplaats would be jealous of the high rate of successful sales AND the incredible speed at which thing get sold....:)
You're absolutely right! - that was i was thinking!!!! but i think it´s nice to see the stuff going to fellow collectors!
-
Would like operation bear! love cheap marquee's and wear and tear gifs its character!
-
Would be kind of cool if it were always like that, not just around Eurocade...
But I know, shipping costs and the like don't make it as accessible as for this occasion.
-
Bingo! That should fit just fine. I will take it...
OK, sold to you 8)
-
Lunar Lander marquee - 15€
M.A.C.H.3 marquee - 15€ :arrow:
-
OK, we have so far ...
Sold! :arrow:
* Electrohome G07CB0 chassis : Robinholland - 10€
* Galaxian marquee : Robinholland - 10€
* G'n'G set 2 of side art : Zapposh - 60€
* Berzerk marquee : Level 42 - 5€
* Pac-Mania 3D marquee : Belike - 5€
* ARABIAN marquee - Vnera - 8€
* Burger Time glass bezel - Muerto - 10€
* QIX marquee - Ckong - 15€
* Silent Scope 2 marquee Box - PunkRockCaveman - 40€
Available :arrow:
* Space Invader Deluxe CP : available - 30€
* Spy Hunter set of 2 side art : available - 60€
* The Invaders bezel : available - 40€
* Q*Bert CPO : available - 35€
* Ghosts'n'Goblins CPO - available - 40€
* Lunar Lander marquee - available - 15€
* M.A.C.H.3 marquee - available - 15€
-
I will take the Lunar Lander marquee, please. :)
-
Ah, I arrive too late for Lunar Lander... :-)
-
Would be kind of cool if it were always like that, not just around Eurocade...
But I know, shipping costs and the like don't make it as accessible as for this occasion.
it's definitely about the shipping costs, about the good prices and about the personal transactions. the good thing is we can already start stacking for next year, but we definitely have to start earlier with this thread ...
-
DAMN! even later for the Lunar Lander marquee ;D ;D ;D
-
Ah, I arrive too late for Lunar Lander... :-)
+1 !
-
@ Ully, Bootleg CK Marquee for me please :P
-
operation bear glass marquee - has a small piece missing at the top on the right and the typical wear from inserting / removing it. sold to vnera for 2 euros :D
(http://farm7.static.flickr.com/6204/6099599092_28e8989d46_b_d.jpg)
Damn, that's the most ugly marque i've ever seen!! ;D ;D
-
and probably the worst game title as well :D
-
Too late for the whole thread :-[
I'm afraid the "market room" will be empty cause all the stuff is sold before Eurocade ;D
WANTED:
If someone's got a Journey-Cab for sale...I'm gonna have an almost empty car on my way home ;)
We are still looking for a Cruis'n World-PCB to be linked to the one we already have.
-
OK, we have so far regarding my items ...
Sold! :arrow:
* Electrohome G07CB0 chassis : Robinholland - 10€
* Galaxian marquee : Robinholland - 10€
* G'n'G set 2 of side art : Zapposh - 60€
* Berzerk marquee : Level 42 - 5€
* Pac-Mania 3D marquee : Belike - 5€
* ARABIAN marquee - Vnera - 8€
* Burger Time glass bezel - Muerto - 10€
* QIX marquee - Ckong - 15€
* Silent Scope 2 marquee Box - PunkRockCaveman - 40€
* Lunar Lander marquee - Ckong - 15€
Available :arrow:
* Space Invader Deluxe CP : available - 30€
* Spy Hunter set of 2 side art : available - 60€
* The Invaders bezel : available - 40€
* Q*Bert CPO : available - 35€
* Ghosts'n'Goblins CPO - available - 40€
* M.A.C.H.3 marquee - available - 15€
-
Let's continue with this Galaxian control panel #1, as is for 15€ :arrow:
-
... and this Galaxian control panel #2, as is for 15€ :arrow:
-
Space Invaders bezel - 20€ :arrow:
-
Galaxian control panel #1 please ;D
-
space invaders bezel please ;)
-
This Q*bert control panel. Very very nice condition, just need to clean it :-* - 28€
(https://www.dragonslairfans.com/4sale/qbertpanel1small.jpg) (http://www.arcadelifestyle.net/4sale/qbertpanel1.jpg)
[click on picture for high resolution picture]
(https://www.dragonslairfans.com/4sale/qbertpanel2small.jpg) (http://www.arcadelifestyle.net/4sale/qbertpanel2.jpg)
[click on picture for high resolution picture]
-
i pass the galaxian cp
-
All I need is for someone to come up with the CP of Ghosts & Goblins. :-)
-
Q*BERT PANEL Q*BERT PANEL Q*BERT PANEL SOLD SOLD SOLD !!!
Got more Q*bert parts ??
Decided to stock up on Q*bert parts, you never know what may happen...
Already got the knocker and a minty fresh "swearing" marquee...need the rest !
-
Ah...that Qbert-Panel looks great :)
-
WANTED:
We are still looking for a Cruis'n World-PCB to be linked to the one we already have.
From the U.S. Price may be ok if adding 20-30 USD, need to check if he is shipping to Europe:
http://forums.arcade-museum.com/showthread.php?t=198097
-
OK, we have so far regarding my items ...
Sold! :arrow:
* Electrohome G07CB0 chassis : Robinholland - 10€
* Galaxian marquee : Robinholland - 10€
* G'n'G set 2 of side art : Zapposh - 60€
* Berzerk marquee : Level 42 - 5€
* Pac-Mania 3D marquee : Belike - 5€
* ARABIAN marquee - Vnera - 8€
* Burger Time glass bezel - Muerto - 10€
* QIX marquee - Ckong - 15€
* Silent Scope 2 marquee Box - PunkRockCaveman - 40€
* Lunar Lander marquee - Ckong - 15€
* Space Invaders bezel - Kid - 20€
* Q*bert control panel - Level 42 - 28€
Available :arrow:
* Space Invader Deluxe CP : available - 30€
* Spy Hunter set of 2 side art : available - 60€
* The Invaders bezel : available - 40€
* Q*Bert CPO : available - 35€
* Ghosts'n'Goblins CPO - available - 40€
* M.A.C.H.3 marquee - available - 15€
* Galaxian control panel #1 - available - 15€
* Galaxian control panel #2 - available - 15€
-
For sale this new reproduction of the Gyruss bezel, printed on vinyl :
(https://www.dragonslairfans.com/4sale/gyruss-bezel-small.jpg) (http://www.arcadelifestyle.net/4sale/gyruss-bezel.jpg)
click on picture for zoom - what you see is what you get ;-)
Price : 15€ without shipping cost.
Price : 10€ at Eurocade :)
See the technique I've used in order to use it on my Gyruss cabinet on this topic (https://www.dragonslairfans.com/smfor/index.php?topic=564.msg5847#msg5847).
Here's the result :
(https://www.dragonslairfans.com/gyruss/bezel_gyruss_10.jpg)
-
All I need is for someone to come up with the CP of Ghosts & Goblins. :-)
You can already start with the CPO I've for sale ;)
Did 'ya finally come this WE @ EUrocade?
Got more Q*bert parts ??
Nope, but I still have a Q*Bert board (boot), but not fully working atm...
-
OK, I'm already very happy with the CP !!
About the board....I have time enough....I'm hoping and praying for JROK's multi-Mylstar-FPGA board...or a very cheap working boar-set (yeah, right !)
-
Thanks Bruno, but I bought a CPO just 3 weeks ago, argghhhh, other I would have taken yours of course.
And no, I would have loved to come to Eurocade, but someone in the family is not well, so we are staying very close at this time.
-
I throw in a wanted: anyone coming to eurocade and has a spare midway Galaxian bezel which he might want to sell? Not only the art, but the complete glass bezel. Fingers crossed.
-
I throw in a wanted: anyone coming to eurocade and has a spare midway Galaxian bezel which he might want to sell? Not only the art, but the complete glass bezel. Fingers crossed.
Hihi, and I need a glass one too :) I'll trade it for a plexi ;) ;) ;)
-
I throw in a wanted: anyone coming to eurocade and has a spare midway Galaxian bezel which he might want to sell? Not only the art, but the complete glass bezel. Fingers crossed.
Hihi, and I need a glass one too :) I'll trade it for a plexi ;) ;) ;)
Glass, plexi, whatever, as long as it is an original bezel. :)
-
And a mint shiny beautiful sparkling like new glass one for Ms Pac-Man for me please. :-)
-
...and a Gravitar please.... ;D ;D ;D ;D
-
WANTED:
We are still looking for a Cruis'n World-PCB to be linked to the one we already have.
From the U.S. Price may be ok if adding 20-30 USD, need to check if he is shipping to Europe:
http://forums.arcade-museum.com/showthread.php?t=198097
Thanks for the link, Andi :)
So, to make it possible to buy that Cruis'n World-PCB from USA I will take offers for this beautiful Carnival wall-cab ;D
-
Hmmm, I might go for that one ;) I always wanted a wall machine since I have no more room in my basement ... but a wall machine might fit in somewhere. Keep this on hold for me, 30$ (+postage to germany) sounds like a very good price too ;) :D
-
Hmmm, I might go for that one ;) I always wanted a wall machine since I have no more room in my basement ... but a wall machine might fit in somewhere. Keep this on hold for me, 30$ (+postage to germany) sounds like a very good price too ;) :D
Yeah baby, you know I'm in USA and shipping such a big package to Germany will cost you $370...it's a total of $400. Because I like you very much I will give it to you on saturday for only $200 !! Bargain ;D
Also Wanted:
For our Sega Turbo Upright cab we need the "speed-meter" or whatever it is on the right side. Anybody got something?
-
still available are the following items with reduced prices - again! c'mon guys, you must be longing for them ... 8)
sega hang on manual - nothing to add except for the very low special eurocade offer: 1 euro
(http://farm7.static.flickr.com/6077/6099599272_35e9086e9d_b_d.jpg)
pole position manual set (3rd printing) which includes the following : operation manual, schematics and monitor manual. special eurocade offer: 6 euros
(http://farm7.static.flickr.com/6197/6099599972_e3e173d9b0_b_d.jpg)
pole position manual set (5th printing) which includes the following : operation manual, schematics and monitor manual. special eurocade offer: 6 euros
(http://farm7.static.flickr.com/6191/6099599704_b9d98f4c46_b_d.jpg)
-
i take the pole position manual set (3rd printing) please ;D
-
Pole Position 5th Printing for me please :-)
-
that's what i'm talking about! ;D
-
okay ully, i pick the hangon manual ;)
-
okay ully, i pick the hangon manual ;)
i knew you couldn't resist that killer price! :P
anyway: everything has been sold, now i need to go through my next box ... ;)
-
P.o.w. came up with a fault ...
(http://img841.imageshack.us/img841/4648/dsc03349um.jpg) (http://imageshack.us/photo/my-images/841/dsc03349um.jpg/)
Only to be skillfully repaired by Cageman on the Nozomi forum :-)
http://www.nozomi.nl/forum/viewtopic.php?f=4&t=3376&start=50
P.o.w saved!
-
Also Wanted:
For our Sega Turbo Upright cab we need the "speed-meter" or whatever it is on the right side. Anybody got something?
I have the whole cp, unfortunately I was already on the road while you posted this. :-\
(https://lh5.googleusercontent.com/-jjyo1-H4g_Q/TlpmjYzRRuI/AAAAAAAAEXs/b2lU1XD6Olg/s912/k%2525C3%2525A9p%252520002.jpg)
-
P.o.w. came up with a fault ...
Only to be skillfully repaired by Cageman on the Nozomi forum :-)
P.o.w saved!
nice!!! it would have sat unused on my shelf for years, so it is in very good hands now!
-
No problem, Bela. Maybe there's an opportunity in the future ;)
Also Wanted:
For our Sega Turbo Upright cab we need the "speed-meter" or whatever it is on the right side. Anybody got something?
I have the whole cp, unfortunately I was already on the road while you posted this. :-\
(https://lh5.googleusercontent.com/-jjyo1-H4g_Q/TlpmjYzRRuI/AAAAAAAAEXs/b2lU1XD6Olg/s912/k%2525C3%2525A9p%252520002.jpg)