Monitors.

[Muerto]

Allan just wrote if we where interested in buying 19" semi flat monitors....
He do not know yet if he can buy any, but if he could, the minimum numbers of monitors should be at least 16 pcs, or else the price will be to high..

[Superully]

i thought he couldn't get any ...

[Muerto]

i thought he couldn't get any ...

He will see if he can find another seller....

[level42]

I'm in for a couple ! (3/4)

[ckong]

I'm in for a couple ! (3/4)

+1

[Muerto]

sorry guys, spoke to him yesterday evening, and he can _not_ find any 19" 

[ckong]

   And I believe that André can't get them either, at least not for a reasonable price (André did you contact Craig in the UK?). So changes to get them are even more worse then I thought. I expect best alterantive, despite the lack of horizontal width adjustment, are CRT TV's. Fortunately we have a 'rommelmarkt' in our village soon, there are always some used and proper sized tv's to find, for prices you can only laugh about (two beers are more expensive).

[level42]

Yeah the CRT TV's are thrown out by the dozens every day. However, I'd like to get some brand new tubes now that I've seen the Kortek.....

I may have found a source for cheap new CRT TV's near your place Erik, would you have time to drive up there some time to check it out ?

What about Craig Erik, did I miss something ? (more likely forgot something).

[ckong]

What about Craig Erik, did I miss something ? (more likely forgot something).

I will send you the e-mail again.

[level42]

Michael, can he get the chassis loose as well and at what prices ?

Do they need high or low impedance yokes ?

[level42]

ok, i've just measured on my gauntlet cab: A = 44 cm, B = 34 centimeters. one centimeter missing in each direction, so those probably won't fit!

I just measured a Hantarex and have about the same results. Would they really not fit ? It's not THAT much difference.
Any chance of getting the type (model) number of that CRT Michael ?

[Muerto]

just wrote him, but it seems you should buy 16 pieces at the time (chassis)
so, he thinks we should drop it..

[level42]

ok, i've just measured on my gauntlet cab: A = 44 cm, B = 34 centimeters. one centimeter missing in each direction, so those probably won't fit!

I just measured a Hantarex and have about the same results. Would they really not fit ? It's not THAT much difference.
Any chance of getting the type (model) number of that CRT Michael ?

Answering my own question: On the guy's site the 21" is mentioned to have a A51ELD031XA10 tube. The 51 stands for 51 cm, and that's FINE for us !
Remember that manufacturers started mentioning tube diameters by the outer sizes in later years. So 19, 20, 21" are almost always the same.

So, can we still get those ?

[Muerto]

if we order enough, (16 is the minimum he can get) im sure there´s no problem.
Ill contact him again tonight.

[Brry71]

Morning y'all,

If you come short to reach 16, I might be in for 2/3 as well.